Kasco® De-icers & Circulators

Free Shipping in the USA

NOTE: The 115 Volt units have 25' electric cords and the 230 Volt units have 50' electrical cords

Kasco® De-icers are perfect for preventing costly ice damage due to jacking/lifting, ice expansion, and winter-kill conditions. Kasco De-Icers are industrial strength and designed and engineered to withstand the harshest marine environments making Kasco thrusting agitators the best in the marketplace. Fresh or saltwater use.

This dock deicer bubbler is specifically designed with a high efficiency motor and propeller with 1750 rpm that creates a directional flow of water. This pushes warm bottom water to the surface and provides an ice-free area of protection around your boat, dock, pier, or other in-water property.

Safe & Easy Installation: Kasco de-icer and circulators are easy to install and comes with a comprehensive instruction manual. It is ETL approved to CS A and UL standards to ensure your safety. Simply plug into a 115V or 230V. Optional universal dock mounting systems are available as well as timer and temperature timer controllers.

With sizes of 1/2, 3/4, and 1hp and units available in 120V or 240V, Kasco De-Icers easily fit your location and electrical requirements. Kasco De-Icers can be suspended by ropes, mounted on an optional Universal Dock Mount, or attached to an optional Horizontal Float for operation in many conditions. Also, optional De-Icer Controllers (C-10 and C-20) can be added to the De-Icing system to help control electric bills.

* Small bodies of water, the Great Lakes, and extreme northern climates may see less open water areas.

Kasco De-Icers come complete for suspended operation from a dock or boat in either a vertical or angled position. The angled operation by suspended method or with optional flotation unit produces an elongated pattern of agitated water. A vertical positioning produces a circular pattern. Vertical positioning of the De-Icer works well under boats and docks or between slips and boats.

Adjusting the angle of the De-Icer suspension is done by simply looping one suspension rope back one or two ribs on the propeller cage. Angled operation can be used to de-ice shallow water areas. This will direct the flow warmer water from a deeper area into the shallower area. Remember, a De-Icer works because it draws warmer, denser water from the bottom and circulates it upward to the surface, preventing ice formation or melting existing ice.

It is often easier to de-ice a boat by installing the de-icer at or near the bow, angled toward the stern. If the water flow is directed toward the shore or a retaining wall, it will flair, forming a desirable"T" shape de-icing pattern.

In tidal waters, split the difference in water depth so the De-Icer is in shallow water at low tide and deep water at high tide. Or, tie your De-Icer to the boat and allow the boat and De-Icer to rise and fall with the tide.
 

Kasco Marine De-icer Features

• Highly efficient, low power consumption motor delivers excellent flow per KW of power.
• Stainless steel construction to withstand the harshest marine environments.
• Engineered with reliable, low maintenance components.
• Heavy duty internal and external seals provide ultimate protection against leaks.
• Industrial strength components stand up to long-term, continuous use.
• Resists corrosion in harsh salt or mineral water with replaceable Zinc Anode.
• Dielectric oil provides maintenance-free lifetime lubrication.
• Easy, one person installation. Comes with everything you need for suspended operation right out of the box, including two 20' suspension ropes.
• Supports vertical or angled mounting for maximum de-icing configurations.
• Easy-to-replace power cords in varying lengths.
• Optional thermostat to minimize electric bills.
• Optional dock mount and floating mount kits for a customized de-icer installation.
• The only de-icer that has ETL approval to stringent UL and CSA Standards.
• Made in the U.S.A.
• 2-Year Warranty.

Kasco De-Icers come complete for suspended operation from a dock or boat in either a vertical or angled position. The angled operation by suspended method or with optional flotation unit produces an elongated pattern of agitated water. A vertical positioning produces a circular pattern. Vertical positioning of the De-Icer works well under boats and docks or between slips and boats.

Adjusting the angle of the De-Icer suspension is done by simply looping one suspension rope back one or two ribs on the propeller cage. Angled operation can be used to de-ice shallow water areas. This will direct the flow warmer water from a deeper area into the shallower area. Remember, a De-Icer works because it draws warmer, denser water from the bottom and circulates it upward to the surface, preventing ice formation or melting existing ice.

It is often easier to de-ice a boat by installing the de-icer at or near the bow, angled toward the stern. If the water flow is directed toward the shore or a retaining wall, it will flair, forming a desirable"T" shape de-icing pattern.

In tidal waters, split the difference in water depth so the De-Icer is in shallow water at low tide and deep water at high tide. Or, tie your De-Icer to the boat and allow the boat and De-Icer to rise and fall with the tide.

Price cuts available! Check for lower prices on Amazon. *As an Amazon affiliate we may recieve payment for purchases made through Amazon.

SUSPENDED OPERATION OF THE DEICER WITH MOORING ROPES (SUPPLIED)
 Kasco De-Icers come complete for suspended operation from a dock or boat in either a vertical or angled position. The angled operation by suspended method or with optional flotation unit produces an elongated pattern of agitated water. A vertical positioning produces a circular pattern. Vertical positioning of the De-Icer works well under boats and docks or between slips and boats.

Adjusting the angle of the De-Icer suspension is done by simply looping one suspension rope back one or two ribs on the propeller cage. Angled operation can be used to de-ice shallow water areas. This will direct the flow warmer water from a deeper area into the shallower area. Remember, a De-Icer works because it draws warmer, denser water from the bottom and circulates it upward to the surface, preventing ice formation or melting existing ice.

It is often easier to de-ice a boat by installing the de-icer at or near the bow, angled toward the stern. If the water flow is directed toward the shore or a retaining wall, it will flair, forming a desirable"T" shape de-icing pattern.

In tidal waters, split the difference in water depth so the De-Icer is in shallow water at low tide and deep water at high tide. Or, tie your De-Icer to the boat and allow the boat and De-Icer to rise and fall with the tide.

UNIVERSAL DOCK MOUNT
Kasco Marine, Inc. offers an optional Universal Dock Mount or Piling Mount that can be used with any Kasco De-Icer. This heavy-duty Universal Dock Mount or Piling Mount is made from thermal plastic composites, corrosion protected steel, and stainless steel to withstand the toughest marine conditions. The De-Icer is mounted to the "underwater parts" of the Universal Dock Mount and the "above water" parts are mounted to the dock or piling. Due to shipping limitations, a 1" pipe extension needs to be supplied by the purchaser to connect the "underwater parts" and "above water" parts. The new Easy Lock handle makes adjustments in the water a breeze.

The De-Icer may be operated in a vertical or several different angled positions. The De-Icer may also be adjusted to a maximum depth of 10' from the above water mounting brackets and it may be moved 360 degrees. This allows for a variety of operating positions and is able to fit and adapt to many different situations and conditions.

HORIZONTAL FLOTATION UNIT
Kasco Marine, Inc. offers an exclusive, arctic proven flotation kit that is optional for all De-Icers. The easy-to-assemble kit consists of stainless steel components and a flotation block. The De-Icer unit is mounted horizontally to the surface of the water, just below the flotation block. The De-Icer can be angled in several positions; horizontal and above and below horizontal.

The horizontal operation of the De-Icer produces an elongated pattern of agitated water. This is well suited for tough problems such as shallow water areas, areas where water and ice levels fluctuate such as tidalwaters, or where elongated open water areas are desired, such as around long docks.

With adjustable angles above and below horizontal, the De-Icer can also be suited to fit many water depth and obstruction conditions.

Each De-Icer boasts the following staples of Kasco equipment:

• Longer-life top and bottom ball bearings
• Environmentally friendly oil-filled motor with a hard-face internal mechanical seal and external lip seal for protection against leaks.
• Flood oil lubricated for excellent heat dissipation.
• Highly efficient, lower power consumption than competitive equipment
• Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode.
• Requires minimal maintenance. We recommend cleaning the stainless steel motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded.
• Extremely efficient and productive operation generating excellent flow per kW of power used
• ETL listed to stringent UL and CSA Safety Standards
• U.P.S. Shippable
• Made with pride in the U.S.A.
  
   

Write a review